Installation Instructions

1. Unscrew the shift knob.

2. Remove the old shift boot and the plastic base by pulling up on the plastic base, releasing it from the center console.

3. Using the included alcohol wipes, thoroughly clean the inside edges of the hole in the center console where the new shift boot base will mount. This will insure that the double sided sticky tape properly adheres.

4. Remove protective backing from the double sided tape on the bottom of the new shift boot base.

5.Slide new shift boot assembly over the shifter and position the shift boot base in the hole of the center console.

6. Press down around the edges of the shift boot base, seating the double sided tape.

7. Reinstall shift knob.